CPE-135AZ/135C
CPE-135AZ/135C
Enwere ike ịgwakọta ngwaahịa ndị dị otú ahụ na ABS, PC, PE, PP na PVC ma dị mma maka ịkpụzi injection.E jiri ya tụnyere polyethylene nkịtị chlorinated na ahịa, chlorinated polyethylene nke Bontecn mepụtara nwere njirimara nke obere iko mgbanwe okpomọkụ, ọrụ nhazi dị elu na elu elongation na nkwụsịtụ.Ọ bụ rọba ọpụrụiche na-arụ ọrụ nke ọma.Enwere ike iji ya naanị ya ma ọ bụ jikọtara ya na roba ethylene-propylene, rubber butadiene-propylene na roba chlorostyrene iji mepụta ngwaahịa rọba.Ngwaahịa ndị a na-emepụta nwere ogologo ndụ ọrụ ma na-eguzogide UV.N'agbanyeghị otú gburugburu ebe obibi na ihu igwe siri sie ike, ha nwere ike ịnọgide na-enwe ihe ndị e bu pụta ụwa nke rọba ruo ogologo oge.
| Index | otu | metrik nchọpụta | CPE-135C | CPE-135AZ |
| Ọdịdị | —— | —— | Ike ọcha | Ike ọcha |
| Ọdịnaya chlorine | % | GB/T 7139 | 35.0± 2.0 | 35.0± 2.0 |
| Njupụta elu | g/cm³ | GB/T1636-2008 | 0.50± 0.10 | 0.50± 0.10 |
| 30 mesh fọdụrụnụ | % | GB/T2916 | ≤2.0 | ≤2.0 |
| Okwu na-agbanwe agbanwe | % | ASTM D5668 | ≤0.4 | ≤0.4 |
| Mooney viscosity | ML125℃1＋4 | GB/T 1232.1-200 | 35-45 | 35-45 |
| Na-agbaji elongation | % | GB/T 528-2009 | ≥800 | ≥800 |
| ike ọdụdọ | M Pa | GB/T 528-2009 | 6.0± 2.5 | ＞8 |
| Ike oke osimiri | Shore A | GB/T2411-2008 | ≤65 | ≤65 |
1. Mmetụta mmetụta dị elu
2. Ọmarịcha nhazi arụmọrụ
3. Nguzogide siri ike na elu okpomọkụ
4. Ezigbo akụrụngwa n'okpuru ọnọdụ okpomọkụ dị ala
CPE-135C / AZ nwere magburu onwe nhazi Njirimara, ezi n'ibu Njirimara na ala okpomọkụ, na ike ga-eji maka ABS mgbanwe.
25kg / akpa, echekwara na ebe dị jụụ na akọrọ, ndụ ndụ bụ afọ abụọ.Enwere ike iji ya mgbe ị gafechara nyocha ndụ shelf.
